السلام عليكم
اود ان اربط خادم Elastix الموجود في نفس الشبكة مع call manager 8.5 من خلال SIP trunk ...
امل من لديه المعرفة ان يوضح خطوات اعدادات Elastix كي اتمكن من اجراء المكالمات بين النظامين ...
ربط Elastix مع Cisco call manager 8.5 من خلال SIP
-
- مشاركات: 2
- اشترك في: 21 أكتوبر 2010, 17:12
-
- مشاركات: 8
- اشترك في: 30 مايو 2010, 10:50
Re: ربط Elastix مع Cisco call manager 8.5 من خلال SIP
السلام عليكم
اخي الكريم هل قمت بعملية الربط.
ارجو منك ان تشرح لي ذالك.
اخي الكريم هل قمت بعملية الربط.
ارجو منك ان تشرح لي ذالك.
-
- مشاركات: 2
- اشترك في: 21 أكتوبر 2010, 17:12
Re: ربط Elastix مع Cisco call manager 8.5 من خلال SIP
نعم اخي تم الربط اتبع الرابط التالي:
http://www.techieanalyst.net/howto/cucm ... fault.aspx
مع التحية ....
http://www.techieanalyst.net/howto/cucm ... fault.aspx
مع التحية ....
-
- مشاركات: 8
- اشترك في: 30 مايو 2010, 10:50
Re: ربط Elastix مع Cisco call manager 8.5 من خلال SIP
جزاك الله خيرا
سوف اقوم بالتجريب
سوف اقوم بالتجريب
Re: ربط Elastix مع Cisco call manager 8.5 من خلال SIP
شكرا على مجهودك ولكن الرابط لا يعمل
-
- مشاركات: 278
- اشترك في: 13 مايو 2010, 22:26
-
- مشاركات: 1
- اشترك في: 26 مايو 2013, 21:34
Re: ربط Elastix مع Cisco call manager 8.5 من خلال SIP
i have installed Elasix, created SIP trunk between Elasix and Cisco Call Manager 8, calls from Elasix to CUCM are working fine, but calls from CUCM to Elasix are not working.
in CUCM, i have followed up the link you post in the discussion, creating SIP security profile, SIP trunk, router patteren for the SIP trunk matching the Elasix extension numbers
Please advice
in CUCM, i have followed up the link you post in the discussion, creating SIP security profile, SIP trunk, router patteren for the SIP trunk matching the Elasix extension numbers
Please advice
-
- مشاركات: 7
- اشترك في: 27 مايو 2013, 21:53
Re: ربط Elastix مع Cisco call manager 8.5 من خلال SIP
Please friends I need your help
I need to cerate Sip trunk between Elastix and cisco call manger 8.6 I mad this configuration without any success
type=friend
context=default
ip=10.0.0.0
port=5060
disallow=all
allow=ulaw
e164=12345
rtptimeout=60
dtmfmode=rfc2833
and
host=10.0.0.0
fromdomain=10.0.0.0
context=from-internal
disallow=all
allow=ulaw,alaw
type=friend
port=5060
nat=auto
insecure=port,invite
qualify=yes
dtmfmode=rfc2833
canreinvite=yes
and I get message all circuits are busy now
help pleae
I need to cerate Sip trunk between Elastix and cisco call manger 8.6 I mad this configuration without any success
type=friend
context=default
ip=10.0.0.0
port=5060
disallow=all
allow=ulaw
e164=12345
rtptimeout=60
dtmfmode=rfc2833
and
host=10.0.0.0
fromdomain=10.0.0.0
context=from-internal
disallow=all
allow=ulaw,alaw
type=friend
port=5060
nat=auto
insecure=port,invite
qualify=yes
dtmfmode=rfc2833
canreinvite=yes
and I get message all circuits are busy now
help pleae